click to zoom

Technical data:
operating current:
24VDC 1.4 - 2.5 amps
operating pressure:
6 bar (90 psi)
reservoir: 500 - 750 ml

Operating Instructions

Brochure

The Accu-Lube Minibooster is ideal for coolant fed tools with diameters between 1mm and 25mm. This newly developed micro-lubrication system is appropriate for coolant fed tools in CNC-machining centers and CNC-turning lathes. The Accu-Lube Minibooster MB II HDSR allows for a safe production process. The advantages of the Accu-Lube Minibooster MB II HDSR are user friendliness, economical use of lubricant, and simple and quick installation.

• Initiated by the electronic control, the system adjusts itself automatically
  to the different tool diameter of coolant fed tools.
• After a tool change it is not necessary to program an M-function for each
  tool.
• The existing CNC-programs must not be changed for a special Mfunction
  for the micro lubricating system.
• Simple installation! The system requires an air supply of 6 bar (90 psi ) and an electrical output of 24V on the CNC-machine tool (M-function cooling-lubricant on/off).
• The system is easy to operate and offers process safety especially during
  high volume batch production.
• The consumption of air is reduced by 20% because the system switches on only when more lubricant- air mixture is needed, as the lubricant is always present in the reservoir.
• The consumption of lubricant is approximately 8-14 ml/h, depending on
  the size of the used tools and the time of use of the tool.